Login   |   chinese
Li xiongbing
Introduction
Research
Areas of Research and Professional Interest

l Backscattering signals analysis processing

l Ultrasonic characterization of material microstructures

l Ultrasonic nondestructive evaluation

Publications
<Selected Publications>

[55]Xiongbing Li, Duo Lyu, Yongfeng Song, Shuzeng Zhang, Ping Hu, and Hyunjo Jeong. Simultaneously Determining Sensitivity and Effective Geometrical Parameters of Ultrasonic Piezoelectric Transducers using a Self-reciprocity Method[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,2019,available online. DOI:10.1109/TUFFC.2019.2925834

[54] Yuantian Huang, Joseph A.Turner, Yongfeng Song, Peijun Ni, Xiongbing Li*. Enhanced ultrasonic detection of near-surface flaws using transverse-wave backscatter[J]. Ultrasonics, 2019,98:20-27.

[53] Shan Li, Joseph A.Turner, Lester W.Schmerr, Xiongbing Li*. Non-paraxial multi-Gaussian beam model of Leaky Rayleigh waves generated by a focused immersion transducer[J]. Ultrasonics, 2019,97:57-62.

[52] Yu Liu, Xiongbing Li*,Chao Chen,Yongfeng Song. High Throughput Rapid Detection for SLM Manufactured Elements Using Ultrasonic Measurement[J]. Measurement, 2019,144:234-242.

[51] Yingdong Fu, Ping Hu, Joseph Turner, Yongfeng Song, Xiongbing Li*. Ultrasonic flaw detection for two-phase Ti-6Al-4V based on secondary scattering[J]. NDT & E International, 2019, 102: 199-206.

[50] Weixin Wang, Xiling Liu, Xiongbing Li, Gang Xu, Shuzeng Zhang*.Modeling Flaw Pulse-Echo Signals in Cylindrical Components Using an Ultrasonic Line-Focused Transducer with Consideration of Wave Mode Conversion[J]. Sensors, 2019,19:12-2744.

[49] Guangdong Zhang, Xiling Liu, Xiongbing Li, Yongfeng Song, Shuzeng Zhang.Measurement of shear wave attenuation coefficient using a contact pulse-echo method with consideration of partial reflection effects[J]. Measurement Science and Technology, 2019, available online. DOI: 10.1088/1361-6501/ab2a5e

[48] Yongfeng Song, Christopher M. Kube, Zuoxiang Peng, Joseph A. Turner, Xiongbing Li. Flaw detection with ultrasonic backscatter signal envelopes[J]. Journal of the Acoustical Society of America, 2019, 145(2): 142-148.

[47]Shufeng Zhang, Chao Ma, Haifeng Hu, Yu Jiang, Xun Chen*, Xiongbing Li. Far-sided defect recognition of FRP sandwich structures based on local defect resonance[J]. Journal of Sandwich Structures & Materials, 2019,available online.DOI:https://doi.org/10.1177/1099636219840250

[46]Hyunjo Jeong, Hyojeong Shin, Shuzeng Zhang, Xiongbing Li, Sungjong Cho. Application of Fresnel Zone Plate Focused Beam to Optimized Sensor Design for Pulse-Echo Harmonic Generation Measurements[J]. Sensors, 2019, 19(6): 1373.

[45] Zhiping Liu, Xiongbing Li, Bing Yi. Generating spiral tool path to machine free-form surface with complex topology based on fusing constraint mapping and enriched voronoi diagram[J]. International Journal of Advanced Manufacturing Technology, 2019,102(1-4) : 647-658.

[44] Xiongbing Li, Zhiping Liu, Fulin Wang, Bing Yi, Yongfeng Song. Combining physical shell mapping and reverse-compensation optimization for spiral machining of free-form surfaces. International Journal of Production Research. 2018,57(13):4118-4131.

[43] Xiongbing Li, Xuanrun Wang, Peijun Ni, Feng Chen*, Yongfeng Song(2018). Automatic Ultrasonic Testing Method for AZ80 Magnesium Alloy Cartridge[J]. Materials Evaluation, 2018,10: 1414-1420.

[42] Shuzeng Zhang, Xiongbing Li*, Hyunjo Jeong, Hongwei Hu. Experimental investigation of material nonlinearity using the Rayleigh surface waves excited and detected by angle beam wedge transducers[J]. Ultrasonics, 2018, 89: 118-125.

[41] Shuzeng Zhang, Xiongbing Li*, Hyunjo Jeong, Sungjong Cho. Investigation of material nonlinearity measurements using the harmonic generation[J]. IEEE Transactions on Instrumentation & Measurement, 2018. (accepted)

[40] Yongfeng Song, Joseph Turner, Zuoxiang Peng, Chao Chen, Xiongbing Li*(2018). Enhanced Ultrasonic Flaw Detection using an Ultra-high Gain and Time-dependent Threshold[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 2018, 65(7): 1214-1225.

[39]. Yongfeng Song, Xuhui Zi, Yingdong Fu, Xiongbing Li*, Chao Chen*, Kechao Zhou(2018). Nondestructive testing of additively manufactured material based on ultrasonic scattering measurement[J]. Measurement, 2018, 118: 105–112.

[38] Xiongbing Li*, Shuzeng Zhang, Hyunjo Jeong, Hongwei Hu. Modelling nonlinear focused beams of a linear phased array using Multi-Gaussian beam model[J]. International Journal of Acoustics and Vibration, 2018, 23(4): 529-533.

[37].Xiujuan Miao, Xiongbing Li*, Hongwei Hu, Guangjun Gao, Shuzeng Zhang(2018). Effects of the Oxide Coating Thickness on the Small Flaw Sizing Using an Ultrasonic Test Technique[J]. Coatings, 2018,8(2): 69.


[36]. Shuzeng Zhang, Ping Hu, Xiongbing Li*, Hyunjo Jeong(2018). Calibration of focused circular transducers using a multi-Gaussian beam model[J]. Applied Acoustics, 2018, 133: 182-185.

[35].Hyunjo Jeong*, Sungjong Cho, Shuzeng Zhang, Xiongbing Li(2018). Acoustic nonlinearity parameter measurements in a pulse-echo setup with the stress-free reflection boundary. Journal of the Acoustical Society of America, 2018, 143 (4): 237-242.

[34]. Hyunjo Jeong*, Shuzeng Zhang, Xiongbing Li(2018). Improvement of pulse-echo harmonic generation from a traction-free boundary through phase shift of a dual element transducer[J]. Ultrasonics, 2018, 87: 145-151.

[33] Shan Li, Xiongbing Li, Yongfeng Song, Chao Chen. Ultrasonic scattering unified theory for polycrystal material with grain sizes distribution[J]. Acta Physica Sinica, 2018, 67(23): 234301.

[32] Bing Yi, Yue Yang, Ran Zheng, Xiongbing Li, Minhan Yi*. Triangulated surface flattening based on the physical shell model[J]. Journal of Mechanical Science and Technology, 2018, 32(5): 2163-2171.

[31] Xuanrun Wang, Peijun Ni, Bing Yi, Xiongbing Li. Research on Collision Detection in Ultrasonic Automatic Testing of Rotary Assembly[J].ACTA ARMAMENTARII, 2018, 39(04): 780-786.

[30]. Xiongbing Li, Yongfeng Song, Andrea P. Arguelles, Joseph A Turner*(2017). Diffuse ultrasonic backscatter using a multi-Gaussian beam model. Journal of The Acoustical Society of America. 2017, 141(6): 195-205.

[29]. Xiongbing Li, Shuzeng Zhang, Hyunjo Jeong*, Sungjong Cho (2017). Calibration of focused ultrasonic transducers and absolute measurements of fluid nonlinearity with diffraction and attenuation corrections[J]. Journal of the Acoustical Society of America, 2017, 142(2): 984-990.

[28]. Yu Liu, Yongfeng Song, Xiongbing Li*, Chao Chen*, Kechao Zhou (2017). Evaluating the Reinforcement Content and Elastic Properties of Mg-based Composites Using Dual-Mode Ultrasonic Velocities[J]. Ultrasonics, 2017, 81:167-173.

[27]. Yongfeng Song, Christopher M. Kube, Joseph A. Turner, Xiongbing Li*(2017). Statistics associated with the scattering of ultrasound from microstructure[J]. Ultrasonics, 2017. 80: 58-61.

[26]. Xiongbing Li, Xiaoqin Han, Andrea P. Arguelles, Yongfeng Song, Hongwei Hu*(2017). Evaluating grain size in polycrystals with rough surfaces by corrected ultrasonic attenuation[J]. Ultrasonics, 2017, 78: 23-29.

[25]. Shuzeng Zhang, Xiongbing Li*, Hyunjo Jeong, Sungjong Cho, Hoingwei Hu (2017). Theoretical and experimental investigation of the pulse-echo nonlinearity acoustic sound fields of focused transducers[J]. Applied Acoustics, 2017, 117: 145-149.

[24]. Shuzeng Zhang, Xiongbing Li*, Hyunjo Jeong (2017). Analytical diffraction corrections for circular focused transducers expressed using the multi-Gaussian beam model[J]. Acta Acustica united with Acustica, 2017, 103(5):717-720.

[23]. Zhiping Liu, Xiongbing Li*, Yongfeng Song, Bing Yi (2017). Generating spiral tool paths based on spiral enter assistant line[J]. The International Journal of Advanced Manufacturing Technology, 2017, 92(1): 869-879.

[22]. Xiongbing Li, Yilin Wang, Peijun Ni, Hongwei Hu, Songyong Feng (2017). Flaw sizing using Ultrasonic C-scan imaging with Dynamic Thresholds. INSIGHT, 2017, 59(11): 603-608.

[21]. ShuZeng Zhang, XiongBing Li*, Hyunjo Jeong, Hongwei Hu (2017). Modeling linear Rayleigh wave sound fields generated by angle beam wedge transducers[J]. AIP Advances, 2017, 7(1): 015005.

[20]. Shuzeng Zhang, Xiongbing Li*, Hyunjo Jeong (2017). Measurement of Rayleigh Wave Beams Using Angle Beam Wedge Transducers as the Transmitter and Receiver with Consideration of Beam Spreading[J]. Sensors, 2017, 17(6):1449.

[19]. Hyunjo Jeong*, Dan Barnard, Sungjong Cho, Shuzeng Zhang, Xiongbing Li (2017). Receiver calibration and the nonlinearity parameter measurement of thick solid samples with diffraction and attenuation corrections[J]. Ultrasonics, 2017, 81: 147-157.

[18]. Bing Yi, Xiongbing Li, Yue Yang. Heterogeneous model integration of complex mechanical parts based on semantic feature fusion[J]. Engineering with Computers, 2017, 33(4): 797-805.

[17]. Shuzeng Zhang, Xiongbing Li*, Hyunjo Jeong, Hongwei Hu (2016). Modeling nonlinear Rayleigh wave fields generated by angle beam wedge transducers-A theoretical study[J]. Wave Motion, 2016, 67: 141-159.

[16]. Shuzeng Zhang, Christopher M. Kube, Yongfeng Song, Xiongbing Li*(2016). A self-reciprocity calibration method for broadband focused transducers[J]. Journal of the Acoustical Society of America, 2016,140(3):236-241.

[15]. Chenxin Zhang, Xiongbing Li*, Yongfeng Song, Xiaoqin Han (2016). Evaluating the grain size in curved components using the ultrasonic attenuation method with diffraction correction[J]. NDT&E international.2016, 84: 20-26.

[14]. Xiaoqin Han, Xiongbing Li*, Yongfeng Song, Peijun Ni,Yiwei Shi(2016). Correcting the Ultrasonic Scattering Attenuation coefficient of a Metal Using an Equivalent Medium Layer[J]. Materials Transactions. 2016, 57(10):1729-1734.

[13]. Liu Zhiping, Li Xiongbing*, Song Yongfeng, et al. (2016). Lofting-based spiral tool path generation algorithm for milling a pocket with an island[J]. The International Journal of Advanced Manufacturing Technology, 2016,88(5): 2169-2178.

[12]. Shuzeng Zhang, Xiongbing Li*, Hyunjo Jeong(2016). A more general model equation of nonlinear Rayleigh waves and their quasilinear solutions[J]. Modern Physics Letters B, 2016,30(8):1650096.

[11]. Song YongFeng, Li XiongBing*, Shi YiWei, Ni Pei-Jun (2016). Effects of surface roughness on diffuse ultrasonic backscatter in the solids [J]. Acta Phys. Sin., 2016, 65 (16): 214301.

[10]. SONG Yongfeng, LI Xiongbing*, WU Haiping, SI Jiayong, HAN Xiaoqin (2016). EFFECTS OF IN718 GRAIN SIZE ON ULTRASONIC BACKSCATTING SIGNALS AND ITS NONDESTRUCTIVE EVALUATION METHOD[J]. ACTA METALLURGICA SINICA. 2016,52(3):378-384.

[9]. Shu-Zeng Zhang, Xiong-Bing Li, Hyunjo Jeong*(2016). Phased Array Beam Fields of Nonlinear Rayleigh Surface Waves[J]. Chinese Physics Letters, 2016, 33(7): 074302.

[8]. Hyunjo Jeong*, Shuzeng Zhang, Sungiong Cho, Xiongbing Li (2016). Development of explicit diffraction corrections for absolute measurements of acoustic nonlinearity parameters in the quasilinear regime[J].Ultrasonics, 2016, 70: 199-293.

[7]. Hyunjo Jeong*, Shuzeng Zhang, Xiongbing Li (2016). A novel method for extracting acoustic nonlinearity parameters with diffraction corrections[J]. Journal of Mechanical Science and Technology, 2016, 30(2):643-652.

[6]. Jeong H*, Zhang SZ, Cho S, Li XB (2016). Development of attenuation and diffraction corrections for linear and nonlinear Rayleigh surface waves radiating from a uniform line source[J]. AIP Advances, 2016, 6(4): 045313.

[5] Xiongbing Li*, Yongfeng Song, Feng Liu, Hongwei Hu, Peijun Ni(2015). Evaluation of mean grain size using the multi-scale ultrasonic attenuation coefficient[J]. NDT&E International, 2015, 72: 25-32.

[4]. Li Xiongbing*, Song Yongfeng, Liu Feng, Wang Zi, Hu Hongwei(2015). Grain size evaluation of structural materials in nuclear power plant using a thickness independent ultrasonic method [J]. Nuclear Inst. and Methods in Physics Research, B, 2015, 351:16-22.

[3]. LI Xiongbing*, SONG Yongfeng, NI Peijun, LIU Feng(2015). ULTRASONIC EVALUATION METHOD FOR GRAIN SIZE BASED ON MULTI-SCALE ATTENUATION [J]. ACTA METALLURGICA SINICA. 2015,51(1): 121-128.

[2]. Xiongbing Li*, Jiajia Liang, Peijun Ni, Yuguo Wang, Yongfeng Song, Linjun Tong(2014). Novel path generation algorithm for high-speed pocket milling. International Journal of Production Research, 2014,52(02):397- 404.

[1]. XiongBing Li*, Hong-Wei Hu, Yue Yang, Pei-Jun Ni(2010). Cheng Yang. Automatic ultrasonic inspection of flaws in a propeller-blade[J]. Nondestructive Testing and Evaluation, 2010, 25(4): 341-351.

Awards
“Automatic ultrasonic testing technique for curved components and its application”, Scientific and technological progress second prize in Hunan province, China