我的主页      中南大学      交通运输工程学院      
登录   |   English
汪馗
个人简介

汪馗,中南大学 交通运输工程学院
博士,教授
地址:湖南省长沙市天心区韶山南路22号中南大学铁道校区交通运输工程学院116,邮编410075
邮箱:kui.wang@csu.edu.cn;kui.wang@outlook.com
电话:18274877311

(欢迎交设、交运、力学、机械、土木等专业报考硕士博士研究生,同时招收少量非全日制研究生)


教育背景:
2009-2013: 博士, 斯特拉斯堡大学, 法国
2007-2009: 硕士, 斯特拉斯堡大学, 法国
2003-2007 :本科, 机械设计制造及其自动化, 武汉理工大学


工作经历:
2017- 至今:教授,中南大学,交通运输工程学院
2015-2017:博士后,卡塔尔环境与能源研究所,卡塔尔
2014 :法国国家助理教授资格(Maitre de conférences)
2013-2015:研发工程师, 卢森堡科学技术研究所, 卢森堡



科研方向
轨道交通材料结构功能一体化创新设计;

轨道交通高性能复合材料的制备成型与表征技术;

3D打印技术、材料、结构、功能及产品评价;

轨道交通复合材料在极端条件下服役安全;

复合材料成型工艺-微观结构-性能-使用特性映射关系;



讲授课程
车辆结构强度与动力学

工程图学测绘实践

英语科技论文写作

学术成果
期刊论文:


(25) Y Peng, Y Wu, K Wang, G Gao, S Ahzi, Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication, Composite Structures, Composite Structures 207, 232-239 (JCR Q1)
(24) Y Peng, Y Wu, K Wang, G Gao, S Ahzi, Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication, Composite Structures, In press (JCR Q1)

(23) Y Peng, W Ma, S Wang, K Wang, G Gao, Investigation of the fracture behaviors of windshield laminated glass used in high-speed trains, Composite Structures 207, 29-40, 2019 (JCR Q1)

(22) J Saththasivam, W Yiming, K Wang, J Jin, Z Liu, A Novel Architecture for Carbon Nanotube Membranes towards Fast and Efficient Oil/water Separation, Scientific Reports 8 (1), 7418 (JCR Q1)
(21) K Wang, J Saththasivam, W Yiming, K Loganathan, Z Liu, Fast and efficient separation of seawater algae using a low-fouling micro/nano-composite membrane, Desalination 433, 108-112, 2018 (JCR Q1)
(20) RM Boumbimba, M Coulibaly, Y Peng, EK N’souglo, K Wang, P Gerard, Investigation of the impact response of PMMA-based nano-rubbers under various temperatures, Journal of Polymer Research, 2018 (JCR Q3)
(19) K Wang, DS Han, W Yiming, S Ahzi, A Abdel-Wahab Z Liu, A windable and stretchable three-dimensional all-inorganic membrane for efficient oil/water separation, Scientific Reports, 7, Article number: 16081, 2017 (JCR Q1)
(18) K Wang, W Yiming, J Saththasivam, Z Liu, A flexible, robust and antifouling asymmetric membrane based on ultra-long ceramic/polymeric fibers for high-efficiency separation of oil/water emulsions, Nanoscale 9, 9018-9025, 2017. (JCR Q1).
(17) AKM Idrissa, K Wang, S Ahzi, S Patlazhan, Y Rémond, A composite approach for modeling deformation behaviors of thermoplastic polyurethane considering soft-hard domains transformation,International Journal of Material Forming, 1-8, 2017. (JCR Q2)
(16) K Wang, AA Abdalla, MA Khaleel, N Hilal, MK Khraisheh, Mechanical properties of water desalination and wastewater treatment membranes, Desalination 401, 190-205, 2017. (JCR Q1)
(15) RM Boumbimba, K Wang, E Hablot, N Bahlouli, S Ahzi, L Avérous, Renewable biocomposites based on cellulose fibers and dimer fatty acid polyamide: Experiments and modeling of the stress–strain behavior. Polymer Engineering & Science 57 (1), 95-104, 2017. (JCR Q2)
(14) K Wang, N Bahlouli, F Addiego, S Ahzi, Elastic and yield behaviors of recycled polypropylene-based composites: Experimental and modeling study, Composites Part B: Engineering 99, 132-153, 2016. (JCR Q1)
(13) K Wang, N Bahlouli, RM Boumbimba, F Addiego, Y Rémond, Specimen Geometry Effect on the Deformation Mechanisms of Polypropylene-Based Composites Under Impact Loading at Different Temperatures, Journal of Dynamic Behavior of Materials 2 (1), 101-111, 2016.
(12) F Addiego, S Patlazhan, K Wang, S André, S Bernstorff, D Ruch, Time-resolved small-angle X-ray scattering study of void fraction evolution in high-density polyethylene during stress unloading and strain recovery. Polymer International 64 (11), 1513-1521, 2015. (JCR Q2)
(11) K Wang, B Brüster, F Addiego, G Kfoury, F Hassouna, D Ruch, J-M Raquez, P Dubois, Strain-induced deformation mechanisms of polylactide plasticized with acrylated poly (ethylene glycol) obtained by reactive extrusion, Polymer International 64 (11), 1544-1554, 2015. (JCR Q2)
(10) N Bahlouli, K Wang, R Matadi, F Addiego, S Ahzi , Strain rate sensitivity of polypropylene based particulate composites, Revue des composites et des matériaux avancés 131, 131, 2015.
(9) F Addiego, I Mihai, D Marti, K Wang, V Toniazzo, D Ruch, Polyaniline as potential radical scavenger for ultra-high molecular weight polyethylene, Synthetic Metals 198, 196-202, 2014 (JCR Q2)
(8) K Wang, F Addiego, A Laachachi, B Kaouache, N Bahlouli, V Toniazzo, D Ruch, Dynamic behavior and flame retardancy of HDPE/hemp short fiber composites: effect of coupling agent and fiber loading, Composite Structures 113, 74-82, 2014 (JCR Q1)
(7) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo , Impact response of recycled polypropylene-based composites under a wide range of temperature: effect of filler content and recycling, Composites Science and Technology 95, 89-99, 2014 (JCR Q1)
(6) K Wang, N Bahlouli, F Addiego, S Ahzi, Y Rémond, D Ruch, R Muller, Effect of talc content on the degradation of re-extruded polypropylene/talc composites, Polymer degradation and stability 98 (7), 1275-1286, 2013. (JCR Q1)
(5) K Wang, S Ahzi, RM Boumbimba, N Bahlouli, F Addiego, Y Rémond , Micromechanical modeling of the elastic behavior of polypropylene based organoclay nanocomposites under a wide range of temperatures and strain rates/frequencies, Mechanics of Materials 64, 56-68, 2013. (JCR Q1)
(4) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo, R Muller, Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blends, Polymer degradation and stability 97 (8), 1475-1484, 2012 (JCR Q1)
(3) RM Boumbimba, K Wang, N Bahlouli, S Ahzi, Y Rémond, F Addiego, Experimental investigation and micromechanical modeling of high strain rate compressive yield stress of a melt mixing polypropylene organoclay nanocomposite, Mechanics of Materials 52, 58-68, 2012. (JCR Q1)
(2) K Wang, RM Boumbimba, N Bahlouli, S Ahzi, R Muller, M Bouquey, Dynamic behaviour of a melt mixing polypropylene organoclay nanocomposites, Journal of Engineering Materials and Technology 134, 010905, 2012. (JCR Q3)
(1) R Matadi, E Hablot, K Wang, N Bahlouli, S Ahzi, L Avérous, High strain rate behaviour of renewable biocomposites based on dimer fatty acid polyamides and cellulose fibres, Composites Science and Technology 71 (5), 674-682, 2011 (JCR Q1)

书籍:
(1) K Wang, AA Abdala, N Hilal, MK Khraisheh, Chapter 13 Mechanical Characterization of Membranes. In handbook “Membrane Characterization by Hilal et al”, Elsevier 2017, ISBN: 9780444637765

美国专利:
(1): K Wang, V Kochkodan, MK Khraisheh, Y Manawi, MA Atieh, Outstanding oil removal using polysulphone nanocomposite membrane reinforced with ultra-high aspect ratio carbon nanotubes. US Patent Provisional Number: 62370207, 2016

学术奖励
2012 中国国家优秀自费留学生奖学金 (法国约25人,全球约500人)
2012 Mechanics of Materials 2012 年全年排名前 25 位下载次数最多的文章