我的主页      中南大学      交通运输工程学院      
登录   |   English
汪 馗
个人简介

汪馗,中南大学 交通运输工程学院
博士,教授,法国国家副教授资格证书 (MCF, sections 33 and 60)
地址:湖南省长沙市天心区韶山南路22号中南大学铁道校区交通运输工程学院116,邮编410075
邮箱:kui.wang@csu.edu.cn;kui.wang@outlook.com
电话:18274877311

(欢迎交设、力学、机械、土木等专业报考硕士博士研究生)

教育经历
2009-2013: 博士, 斯特拉斯堡大学, 法国
2007-2009: 硕士, 斯特拉斯堡大学, 法国
2003-2007 :本科, 武汉理工大学
工作经历
2017- 至今:教授,中南大学,交通运输工程学院
2015-2017:博士后,卡塔尔环境与能源研究所,卡塔尔
2013-2015:研发工程师, 卢森堡科学技术研究所, 卢森堡
2010-2013:助教,斯特拉斯堡大学,法国

社会兼职
学术兼职:

欧洲冲击力学组织(DYMAT) 成员
欧洲力学协会 (EUROMECH) 成员
法国材料力学协会 (MECAMAT) 成员
法国力学协会 (AFM) 成员
法国复合材料协会(AMAC) 成员


学术服务:
Transportation Safety and Environment, Editor


期刊审稿:

Composites Part A: Applied Science and Manufacturing
Composites Part B: Engineering
Journal of Engineering and Technology Research
Journal of Engineering Materials and Technology
Polymer Engineering and Science
Journal of Polymers and the Environment
Journal of Applied Polymer Science
Composite Structures
Journal of Magnetism and Magnetic Materials
...


科研方向
轨道交通材料与结构一体化创新设计制造;

轨道交通材料与结构全生命周期服役安全;

3D打印技术与产品设计评价;

材料结构设计与机器学习;

冲击动力学,极端力学;

再制造技术与资源再利用。


科研项目:
2019-2021:创新驱动,56万, 主持

2018-2021:国家重点研发计划,独立轮橡胶材料的特性及其耐久性研究,20万, 主持
2017- 2021:中南大学科研启动项目,120万,主持
2015-2017:设计,制造和表征具有机械柔韧性和热机械强度的废水处理和海水淡化薄膜,约500万,主要负责人
2016:聚甲基丙烯酸甲酯/增强玻璃长纤维/纳米橡胶结构复合材料的成型工艺及其热机械性能研究,37万,主持
2013-2016:增塑聚乳酸复合材料的可回收性研究,约 600万,卢森堡国家研究基金资助,主要参与
2012-2015:高密度聚乙烯/天然纤维复合材料的热机械性能及形变失效机理研究,约120万,卢森堡国家研究基金资助,主要参与
2009-2012:回收复合材料在汽车保险杠中的应用, 约 700万,法国环境和能源管理局和法国阿尔萨斯省资助, 主要参与
2010-2012: 汽车用聚合物基纳米黏土纳米材料的热机械性能研究,约 730万 ,欧盟研究资金资助,主要参与
2009-2011:建筑用聚酰胺/纤维素生物复合材料的热机械性能研究,约 220万,SOPREMA 资助,主要参与







讲授课程
车辆结构强度与动力学

列车牵引与制动 (英语)

工程图学测绘

结构力学

英语科技论文写作(研究生)

冲击动力学(研究生)
轨道交通装备智能制造关键技术(研究生)

学术成果

期刊论文:

(29) K Wang, Y Peng, RM Boumbimba, N Bahlouli, D Pessey, A Said, Constitutive Modeling of the Tensile Behavior of Recycled Polypropylene Based Composites, Materials, 2019 (JCR Q2)
(28) Molecular Dynamics Study on the Tribological Properties of Phosphorene/Polyethylene Composites, Coatings 9(5):342, 2019 (JCR Q2)
(27) J Saththasivam, K Wang, W Yiming, Z Liu, KA Mahmoud, A Flexible Ti3C2Tx (MXene)/Paper Membrane for Efficient Oil/Water Separation, RSC Advances,2019 (JCR Q2)

(26) X Chen, Y Peng, C Chen, J Li, K Wang, T Wang, Mechanical behavior and texture evolution of aluminum alloys subjected to strain path changes: Experiments and modeling, Materials Science and Engineering: A ,2019 (JCR Q1)
(25) Y Peng, Y Wu, K Wang, G Gao, S Ahzi, Synergistic reinforcement of polyamide-based composites by combination of short and continuous carbon fibers via fused filament fabrication, Composite Structures 207, 232-239,2019 (JCR Q1)

(24) Y Peng, W Ma, S Wang, K Wang, G Gao, Investigation of the fracture behaviors of windshield laminated glass used in high-speed trains, Composite Structures 207, 29-40, 2019 (JCR Q1)

(23) J Saththasivam, W Yiming, K Wang, J Jin, Z Liu, A Novel Architecture for Carbon Nanotube Membranes towards Fast and Efficient Oil/water Separation, Scientific Reports 8 (1), 7418 (JCR Q1)

(22) K Wang, J Saththasivam, W Yiming, K Loganathan, Z Liu, Fast and efficient separation of seawater algae using a low-fouling micro/nano-composite membrane, Desalination 433, 108-112, 2018 (JCR Q1)

(21) YM Manawi, K Wang, V Kochkodan, DJ Johnson, MA Atieh, MK Khraisheh, Engineering the Surface and Mechanical Properties of Water Desalination Membranes Using Ultralong Carbon Nanotubes, Membranes 8 (4), 106,2018
(20) RM Boumbimba, M Coulibaly, Y Peng, EK N’souglo, K Wang, P Gerard, Investigation of the impact response of PMMA-based nano-rubbers under various temperatures, Journal of Polymer Research, 2018 (JCR Q3)
(19) K Wang, DS Han, W Yiming, S Ahzi, A Abdel-Wahab Z Liu, A windable and stretchable three-dimensional all-inorganic membrane for efficient oil/water separation, Scientific Reports, 7, Article number: 16081, 2017 (JCR Q1)
(18) K Wang, W Yiming, J Saththasivam, Z Liu, A flexible, robust and antifouling asymmetric membrane based on ultra-long ceramic/polymeric fibers for high-efficiency separation of oil/water emulsions, Nanoscale 9, 9018-9025, 2017. (JCR Q1).
(17) AKM Idrissa, K Wang, S Ahzi, S Patlazhan, Y Rémond, A composite approach for modeling deformation behaviors of thermoplastic polyurethane considering soft-hard domains transformation,International Journal of Material Forming, 1-8, 2017. (JCR Q2)
(16) K Wang, AA Abdalla, MA Khaleel, N Hilal, MK Khraisheh, Mechanical properties of water desalination and wastewater treatment membranes, Desalination 401, 190-205, 2017. (JCR Q1)
(15) RM Boumbimba, K Wang, E Hablot, N Bahlouli, S Ahzi, L Avérous, Renewable biocomposites based on cellulose fibers and dimer fatty acid polyamide: Experiments and modeling of the stress–strain behavior. Polymer Engineering & Science 57 (1), 95-104, 2017. (JCR Q2)
(14) K Wang, N Bahlouli, F Addiego, S Ahzi, Elastic and yield behaviors of recycled polypropylene-based composites: Experimental and modeling study, Composites Part B: Engineering 99, 132-153, 2016. (JCR Q1)
(13) K Wang, N Bahlouli, RM Boumbimba, F Addiego, Y Rémond, Specimen Geometry Effect on the Deformation Mechanisms of Polypropylene-Based Composites Under Impact Loading at Different Temperatures, Journal of Dynamic Behavior of Materials 2 (1), 101-111, 2016.
(12) F Addiego, S Patlazhan, K Wang, S André, S Bernstorff, D Ruch, Time-resolved small-angle X-ray scattering study of void fraction evolution in high-density polyethylene during stress unloading and strain recovery. Polymer International 64 (11), 1513-1521, 2015. (JCR Q2)
(11) K Wang, B Brüster, F Addiego, G Kfoury, F Hassouna, D Ruch, J-M Raquez, P Dubois, Strain-induced deformation mechanisms of polylactide plasticized with acrylated poly (ethylene glycol) obtained by reactive extrusion, Polymer International 64 (11), 1544-1554, 2015. (JCR Q2)
(10) N Bahlouli, K Wang, R Matadi, F Addiego, S Ahzi , Strain rate sensitivity of polypropylene based particulate composites, Revue des composites et des matériaux avancés 131, 131, 2015.
(9) F Addiego, I Mihai, D Marti, K Wang, V Toniazzo, D Ruch, Polyaniline as potential radical scavenger for ultra-high molecular weight polyethylene, Synthetic Metals 198, 196-202, 2014 (JCR Q2)
(8) K Wang, F Addiego, A Laachachi, B Kaouache, N Bahlouli, V Toniazzo, D Ruch, Dynamic behavior and flame retardancy of HDPE/hemp short fiber composites: effect of coupling agent and fiber loading, Composite Structures 113, 74-82, 2014 (JCR Q1)
(7) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo , Impact response of recycled polypropylene-based composites under a wide range of temperature: effect of filler content and recycling, Composites Science and Technology 95, 89-99, 2014 (JCR Q1)
(6) K Wang, N Bahlouli, F Addiego, S Ahzi, Y Rémond, D Ruch, R Muller, Effect of talc content on the degradation of re-extruded polypropylene/talc composites, Polymer degradation and stability 98 (7), 1275-1286, 2013. (JCR Q1)
(5) K Wang, S Ahzi, RM Boumbimba, N Bahlouli, F Addiego, Y Rémond , Micromechanical modeling of the elastic behavior of polypropylene based organoclay nanocomposites under a wide range of temperatures and strain rates/frequencies, Mechanics of Materials 64, 56-68, 2013. (JCR Q1)
(4) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo, R Muller, Analysis of thermomechanical reprocessing effects on polypropylene/ethylene octene copolymer blends, Polymer degradation and stability 97 (8), 1475-1484, 2012 (JCR Q1)
(3) RM Boumbimba, K Wang, N Bahlouli, S Ahzi, Y Rémond, F Addiego, Experimental investigation and micromechanical modeling of high strain rate compressive yield stress of a melt mixing polypropylene organoclay nanocomposite, Mechanics of Materials 52, 58-68, 2012. (JCR Q1)
(2) K Wang, RM Boumbimba, N Bahlouli, S Ahzi, R Muller, M Bouquey, Dynamic behaviour of a melt mixing polypropylene organoclay nanocomposites, Journal of Engineering Materials and Technology 134, 010905, 2012. (JCR Q3)
(1) R Matadi, E Hablot, K Wang, N Bahlouli, S Ahzi, L Avérous, High strain rate behaviour of renewable biocomposites based on dimer fatty acid polyamides and cellulose fibres, Composites Science and Technology 71 (5), 674-682, 2011 (JCR Q1)

国际会议报告及论文:


(21) Y. Yang, T. Wang, K. Wang, F. Xu, Curvature effect on wrinking and restabilization of highly stretched elastic shells, Engineering Mechanics Institute International Conference 2018, Shanghai, China, Nov. 2-4th 2018
(20) Y. Peng, W. Ma, S. Wang, K. Wang*, Impact behaviors of tempered glass and PVB laminated windshield for high-speed trains, 1st International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (ICOMP 2018), Wuhan, China, May 23-25 2018
(19) RM Boumbimba, M Coulibaly, K Wang, Investigation of the impact response of PMMA based nano-rubber over a large range of temperatures and strain rates, International Conference on Engineering, Applied Sciences and System Modeling (iceassm2017), April 18-21 2017, Accra, Ghana.

(18) RM Boumbimba, M Reulier, E Hablot, K Wang, N Bahlouli, S Ahzi, L Avérous, Modelling of compressive high strain rate behavior of biocomposite: application to dimer fatty acid-based polyamides with cellulose fibres, International Workshop DynEcoComp Dynamic behaviour of green composites, September 27-29 2016, ISAE-ENSMA, Poitiers, France.
(17) K Wang, M Khaleel, YM Manawi, V Kochkodan, MA Hussien, MK Khraisheh, A Benamor, Mechanical behavior of a fillerreinforced membrane for water treatment, 2nd International Conference on Desalination and Environment, January 23-26 2016, Doha, Qatar.
(16) K Wang, RM Boumbimba, N Bahlouli, S Ahzi, R Muller, Dynamic mechanical characterization and modelling of polypropylene based organoclay nanocomposite, 11th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, September 7-11 2015, Lugano, Switzerland.
(15) RM Boumbimba, K Wang, F Addiego, M Arnaud, P Gerard, D Ruch, Influence of fibre aqueous-based sizing treatments and of the matrix intrinsic reinforcement on the damage mechanisms of novel laminated acrylic thermoplastic composites, 18th International Conference on Composite Structures, June 15-18 2015, Lisbon, Portugal.
(14) N Bahlouli, K Wang, RM Boumbimba, C Wagner-Kocher, S Ahzi, Quasistatic to dynamic behavior of particulate composites for different temperatures, SEM 2015 Annual Conference and Exposition on Experimental and Applied Mechanics, June 8-11 2015, Hilton Orange County/Costa Mesa, Costa Mesa, CA, U.S.
(13) B Brüster, F Addiego, K Wang, S André, V Toniazzo, JM Raquez, P Dubois, Chain orientation and phase transformation competition in PLA and plasticized PLA during tensile testing, 6th International Conference on Polymer Behaviour (ICPB6), September 22-26 2014, University of Vienna, Austria.
(12) K Wang, N Bahlouli, F Addiego, S Ahzi, Y Remond, R Muller, Effect of recycling on polypropylene/ethylene octene rubber blends and polypropylene / talc composites used in automotive applications, Russian-French Symposium on composite materials, July 10-13 2012, Saint Petersburg, Russia.
(11) K Wang, N Barth, S Ahzi, R Matadi, N Bahlouli, Y Remond, On the micromechanical modeling of the thermomechanical behavior of semicrystalline polymers and polymer nanocomposites, Russian-French Symposium on composite materials, July 10-13 2012, Saint Petersburg, Russia.
(10) S Ahzi, K Wang, M Baniassad, N Bahlouli, R Matadi, Y Remond, H Garmestani, J Gracio, On the micromechanical modeling of the effective properties of polymer nanocomposites: statistical and classical approaches, 15th international conference on deformation, yield and fracture of polymers, April 1-5 2012, Rolduc Abbey, Kerkrade, Netherlands.
(9) N Bahlouli, Y Rémond, K Wang, R Matadi, S Ahzi, Dynamic behavior of virgin and recycled PP/EPR and PP/EPDM/Talc materials for car bumpers, 18th International Conference on Composite Materials, August 21-26 2011, Jeju island, Korea.
(8) R Matadi, N Bahlouli, K Wang, S Ahzi, Constitutive micromechanical model for the dynamic behavior of thermoplastics, 3rd International Conference on Impact Loading of Lightweight Structures, 28th June–1st july 2011, Valenciennes, France.
(7) R Matadi, N Bahlouli, K Wang, S Ahzi, Y Rémond, R Muller, Polymer/organoclay nanocomposites: processing, 27th World Congress of the Polymer Processing Society (PPS), May 10-14 2011, Marrakech, Morocco.
(6) S Ahzi, N Bahlouli, K Wang, R Matadi, Micromechanical Modeling of the Dynamic Behavior of Amorphous and Crystalline Polymers, 2011 TMS Annual Meeting & Exhibition, 27th February–3rd March 2011, San Diego, California, U.S.
(5) S Ahzi, N Bahloui, K Wang, R Matadi, R Muller, Mechanical Behavior of Melt Mixing Polypropylene Organoclay Nanocomposites, 2011 TMS Annual Meeting & Exhibition, 27th February–3rd March 2011, San Diego, California, U.S.
(4) R Matadi, K Wang, N Bahlouli, F Addiego, S Ahzi, Y Rémond, Modeling of the dynamic behavior of organoclay nanocomposites ,19th DYMAT Technical Meeting, December 1-3 2010, Strasbourg, France.
(3) K Wang, R Matadi, N Bahlouli, F Addiego, S Ahzi, Y Rémond, Experimental identification of dynamic behavior of exfoliated polypropylene based organoclay nanocomposites for a wide range of temperatures, 19th DYMAT Technical Meeting, December 1-3 2010, Strasbourg, France.
(2) K.Wang, RM Boumbimba, N Bahlouli, S Ahzi, R Muller, M Bouquey, Dynamic behaviour of a melt mixing polypropylene organoclay nanocomposites, 1st DYMAT Student Camp, October 5-7 2010, Guéthary, France.
(1) K Wang, R Matadi, N Balhouli, S Ahzi, Y Remond, M Bouquey, R Muller, polypropylene based organoclay nanocomposites: stiffness and yield stress predictions, 3rd International Conference on Advanced Nano Materials, September 12-15 2010, Agadir, Morocco.

地区性会议报告及论文:


(10) K Wang, YM Manawi, V Kochkodan, MA Hussien, MK Khraisheh, A Benamor, Mechanical behavior of a novel nanocomposite polysulphone – carbon nanotubes membrane for water treatment, Qatar Foundation Annual Research Conference, March 22-23 2016, Doha, Qatar.
(9) K Wang, R Matadi , C Bernard, N Bahlouli, PM Correia, S Ahzi, Y Rémond. Influence du taux de charge et de la température sur le comportement mécanique de composites particulaires :du statique au dynamique, JST Transition statique – dynamique dans les matériaux et structures composites, November 5th, 2014, ONERA, Chatillon, France.

(8) F Addiego, K Wang, B Kaouache, V Toniazzo, D Ruch, Effet du taux de fibre et de l’agent de couplage sur le comportement en compression dynamique de composites HDPE / fibres courtes de chanvre, 25ème fois le DEPOS (DEformation des POlymères Solides), March 26-28 2014, presqu?le de Giens, France.
(7) K Wang, F Addiego, G Kfoury, F Hassouna, V Toniazzo, D Ruch, Mécanismes de déformation en traction du polylactide (PLA) non modifié et plastifié par extrusion réactive, 25ème fois le DEPOS (DEformation des POlymères Solides), March 26-28 2014, presqu?le de Giens, France.
(6) N Bahlouli, K Wang, S Ahzi, Y Rémond, F Addiego, Effects du recyclage sur le polypropylene charges, Mécanique des matériaux biosourcés, January 20 - 24 2014, Aussois, France.
(5) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo, D Ruch, Effect of recycling on the mechanical properties of polypropylene/EPR/talc composites used in automotive applications, 39ème Journées d’Etudes des Polymères (JEPO 39), October 16-21 2011, Val Joly, Eppe-Sauvage, France.
(4) R Matadi, E Hablot, K Wang, N Bahlouli, S Ahzi, L Averous, Analyse du comportement mécanique de biocomposites, à base de polyamides biosourcés et de fibres de cellulose, à haut taux de deformation, GDR week à l’Ecole des Mines de Saint-étienne, March 28-31 2011, France.
(3) K Wang, F Addiego, N Bahlouli, S Ahzi, Y Rémond, V Toniazzo, D Ruch, Effect of recycling on the mechanical properties of polypropylene/EPR/talc composites used in automotive applications, 11ème Journée Scientifique GFP Grand-Est, June 22 2011, Luxembourg.
(2) N Bahlouli, K Wang, JG Sieffert, S Ahzi, Comportement thermomécanique dynamique de polymères multiphasés, Matériaux 2010, October 18 - 22 2010, Nantes, France.
(1) K Wang, N Bahlouli, S Ahzi, Chargement thermomécanique des polymères sous sollicitation dynamique, Journée Mécamat, May 20 2010, Paris, France.




书籍:
(1) K Wang, AA Abdala, N Hilal, MK Khraisheh, Chapter 13 Mechanical Characterization of Membranes. In handbook “Membrane Characterization by Hilal et al”, Elsevier 2017, ISBN: 9780444637765
(2)R Matadi,M Coulibaly,K Wang,Investigation of the Impact Response of PMMA-Based Nano-rubbers Over a Large Range of Temperatures and Strain Rates,In book: Data-Driven Modeling for Sustainable Engineering,January 2020

美国专利:
(1): K Wang, V Kochkodan, MK Khraisheh, Y Manawi, MA Atieh, Outstanding oil removal using polysulphone nanocomposite membrane reinforced with ultra-high aspect ratio carbon nanotubes. US Patent Provisional Number: 62370207, 2016

学术奖励
2012 中国国家优秀自费留学生奖学金 (法国约25人,全球约500人)
2012 Mechanics of Materials 2012 年全年排名前 25 位下载次数最多的文章